A Computational Model for Velocity Separation in Shallow Sea   总被引：1，自引：0，他引：1  

SONG  Zhiyao 《中国海洋工程》2002,16(3):407-413

Based on the hydrodynamical feature and the theoretical velocity profiles of tidal flow and vvind-induced flow in shal-low sea, a computational model is established for the first time, which can separate observed velocity into tidal velocity and wind-induced velocity by use of the least square method. With the model, not only the surface velocities of tidal flow and vvind-induced flow are obtained, but also the bed roughness height is determined and the wind velocity above the wa-ter surface is estimated. For verification of the model, the observed velocity in the Yellow River Estuary and the laborato-ry test is separated, then it is applied to the Yangtze River Estuary. All the results are satisfactory. The research results show that the model is simple in method, feasible in process and reasonable in result. The model is a valid approach to analysis and computation of field dala, and can be applied to separate the observed velocity in shallow sea; at the same time, reasonable boundary conditions of th  相似文献   

地形坡度对多金属结核分布的控制作用   总被引：3，自引：3，他引：3  

王英  李家彪  韩喜球  吴自银 《海洋学报》2001,23(1):60-65

选取我国东太平洋多金属结核开辟区内的一个区域作为研究区,利用人工神经网络中应用最为广泛的BP网络,建立控制多金属结核分布的地质因素与多金属结核分布之间的映射关系,探讨地形坡度对多金属结核分布的控制作用.结果表明,在经度、纬度、水深、坡度四个因素中,坡度对结核分布影响程度最大;多金属结核主要分布于坡度小于5°的地方;当坡度小于5°时,丰度与地形坡度呈正相关,品位与地形坡度呈负相关,丰度与品位呈负相关;品位与坡度似呈指数关系,坡度增大,品位降低.  相似文献   

Semi-Probabilistic Evaluation of System Redundancy for Existing Offshore Structures     

Zhang Shengkun Chen Kaisheng Mu Yang Professor 《中国海洋工程》1995,(1)

In this paper, a new definition of structure system redundancy is proposed in view of the various measures for structure redundancy. By introducing the terms of structure system failure at the mechanism level and equivalent reliability index, the safety for existing offshore platforms can be evaluated by the semi-probabilistic method presented in this paper. Some numerical examples are given and satisfactory results have been obtained.  相似文献   

Numerical Analysis of Wave Forces on Arbitrarily Shaped Multi-Pillars Over Varying Topography     

Zhang Libang Research Engineer  First Institute of Oceanography  Qingdao 《中国海洋工程》1991,(4)

The modified hybrid element method (MHEM) is utilized to predict and analyze wave forces on arbitrarily shaped multiple bodies. This method can be applied to waves of all water depths, i. e. shallow, intermediate, and deep waters, on slowly varying seabed. The MHEM employs the ICCG method to save CPU and storage, thus the computation of wave forces for large multi-body systems can be carried out on microcomputers. Numerical results of the present method are compared with experimental data and other solutions. It is shown that the MHEM provides more accurate solutions of the wave forces than other numerical methods do. Therefore, the methodology presented herein can be used in the design of coastal and ocean structures.  相似文献   

黄海表面水温场的准周期变化分析     

汤明义  李洪海 《中国海洋大学学报(自然科学版)》1989,(Z1)

本文用能谱方法分析了黄海的海表面水温(SST)场的准周期变化。由分析结果清楚地看出,SST具有高频准周期变化:黄海北部以2.6—3.2,1.4—1.7,3.6—3.8和6.7个月的准周期为主;3.3—3.6,5,1.3—2.3及6.7个月在黄海南部占优势。同时,两个海域都有6.7和3.3年的明显的准周期变化。  相似文献   

红树林遥感智能分类方法研究   总被引：13，自引：0，他引：13  

滕骏华  刘宇 《台湾海峡》1997,16(3):331-338

利用ＧＩＳ信息中的红树林地域分布规律作向导，充分利用械树林区的光谱信息进行红树林植被信息提取。在对比研究常规的红树林图象自理方法的基础上，提出了适用于红树林植被信息遥感监测的智能分类方法。  相似文献   

分潮波模型多资料数值计算方法研究　Ⅱ.有限差分最小二乘方法     

潘文波  孙文心  王骥 《中国海洋大学学报(自然科学版)》1996,(2)

对含多资料的分潮波模型的超定问题进行探讨，建立一种有限差分—最小二乘方法，该方法使得岸边资料直接进入了计算方程，并保证岸界法向流速为零条件。通过对渤海的四大分潮的试算，证实本方法可行。  相似文献   

Analysis of Mixing of Pollutants in Water Waves and Currents     

袁丽蓉  沈永明唐军 《中国海洋工程》2007,21(1):115-124

A vertical two-dimensional turbulence numerical model for the interaction of waves and currents is developed in the paper based on the nonlinear two-equation k-ε model with the VOF method.The one-dimensional equivalent advection velocity and equivalent mixing coefficient are defined and the solving process is introduced:The pollutant concentration field,generated by an instant source in waves and currents,is calculated with the model,and then the equivalent advection velocity and equivalent mixing coefficient are obtained by calculating the time derivative of the mean and variance of pollutant concentration probability distribution.The effects of wave period and wave height on the equivalent mixing coefficient for waves and wave-currents are also investigated.  相似文献   

Numerical Study on Instantaneous Discharge of Unsorted Particle Cloud in Cross Flow     

顾杰  李志伟杨红 詹咏 《中国海洋工程》2007,21(2):305-316

The mixing characteristics of particles such as dredged sediment of variable size discharged into cross flow are studied by a 3D numerical model, which is developed to model the particle-fluid two-phase flow. The Eulerian method with the modified k-ε parameterization of turbulence for the fluid phase is used to solve fluid phase, while a Lagrangian method for the solid phase (particles), both the processes are coupled through the momentum sources. In the model the wake turbulence induced by particles has been included as additional source term in the k-ε model; and the variable drift velocities of the particles are treated efficiently by the Lagrangian method in which the particles are tracked explicitly and the diffusion process is approximated by a random walk model. The hydrodynamic behavior of dumping a cloud of particles is governed by the total buoyancy of the cloud, the drag force on each particle and the velocity of cross-flow. The computed results show a roughly linear relationship between the displacement of the frontal position and the longitudinal width of the particle cloud. The particle size in the cloud and the velocity of cross flow dominate the flow behavior. The computed results are compared with the results of laboratory experiments and satisfactory agreement is obtained.  相似文献   

Design of ship's bow form by potential-based panel method     

Jaehoon Yoo   《Ocean Engineering》2007,34(8-9):1089-1095

A surface panel method treating a boundary-value problem of the Dirichlet type with the free surface is presented to design a three-dimensional body corresponding to a prescribed pressure distribution. The free surface boundary condition is linearized with respect to the oncoming flow, and computed by four-point finite difference scheme. Sample designs for submerged spheroids and Wigley hull are carried out to demonstrate the stable convergence, the effectiveness and the robustness of the method. The design of a 5500TEU container carrier is performed with respect to reduction of the wave resistance. To reduce the wave resistance, calculated pressure on the hull surface is modified to have the lower fluctuation, and is applied as a Dirichlet type dynamic boundary condition on the hull surface. The designed hull form is verified to have the lower wave resistance than the initial one not only by computation but also by experiment.  相似文献